Dakota Labs works best on a laptop or desktop with a current browser, and also works on an iPad. On a phone, students can use their classes, Explore and the lab simulator, with the phone turned sideways.
Laptops and desktops
- Use a current version of Chrome, Firefox or Safari.
- The wiring board is 3D, so your browser needs its graphics turned on. If the board stays blank, check that hardware acceleration is on in your browser settings.
- Mouse or trackpad: go to Settings, then Scroll wheel, and choose Zoom in and out (best with a mouse wheel) or Pan the board (best with a laptop trackpad). Pinch to zoom on a trackpad, and dragging to pan, work either way. This setting is saved on that device only, so a shared classroom computer and your own laptop can each keep their own.
iPad and tablets
iPads get the full experience. On the wiring board:
- Slide one finger to pan.
- Tap to act, for example tap one screw and then another to run a wire.
- Press and hold a part to tilt it.
- Use two fingers to pinch and zoom.
- An Apple Pencil works the same as a finger.
There is no double tap on a tablet.
Phones
- Phones are for students: your classes, Explore and the lab simulator.
- When you open a lab, you’ll see Turn your phone sideways. Rotate to landscape and the lab opens.
- Other pages, including everything instructors use, show Open this on a computer.
- Lessons aren’t available on phones yet. Open them on a computer or tablet.
Chromebooks and older devices
Dakota Labs lowers the graphics detail by itself on devices with less memory, such as some Chromebooks and older iPads. If a part shows a Couldn’t load message, reload the page. Closing other tabs can also help.
Opening Dakota Labs from Moodle
If your Moodle activity shows Continue to Dakota, click Open Dakota. It opens in a new window.
- If you see Allow a popup for this activity, then try again., allow pop-ups for your Moodle site in your browser and click Open Dakota again.
- If you closed the Dakota window, go back to Moodle and open the activity again.
Common problems
- The board is blank or parts won’t load. Reload the page, close other tabs, and check that hardware acceleration is on.
- I’m on a phone and can’t reach a page. Open it on a computer or tablet.
- The phone keeps asking me to rotate. Turn off rotation lock, then turn the phone sideways.